Your cart is currently empty.
Reversible pilot seat cushion (Large version: 38" x 23"). Click here for the original size. This cushion is made from UV resistant marine grade vinyl, 3" Ultra High density foam, 3/4 inch treated plywood and stainless hardware. This cushion fastens to your new or existing "Z" legs with 8 stainless steel screws and can be used in place of the regular 38"x19" cushion.
Care and Maintenance Instructions
Note: Holes are not pre-drilled
Note: There are two sizes for this seat. The regular (38" X 19") is found on most hulls prior to the 1990's while the larger (38" X 23") is found primarily on 1990-1999 classic 17' hulls. If using the larger seat cushion you will also need the larger swing arms found here.
Note: (For installation onto Z-legs) in addition to the wood screws provided, it is recommended to use 5200 Marine Adhesive to attach the cushion to the Z-legs. This is highly recommended for the 18" Z-legs which flex more than the 15" legs. To do this, cut a small patch of mesh off around each screw location and apply adhesive so the wood is adhered directly to the legs.
Dimensions: 38" x 23"