RPS SEAT CUSHION - BOSTON WHALER MONTAUK, OUTRAGE, NEWPORT AND OTHERS
RPS SEAT CUSHION - BOSTON WHALER MONTAUK, OUTRAGE, NEWPORT AND OTHERS
Boston Whaler
Boston Whaler
Boston Whaler
Boston Whaler
Boston Whaler
RPS SEAT CUSHION - BOSTON WHALER MONTAUK, OUTRAGE, NEWPORT AND OTHERS
RPS SEAT CUSHION - BOSTON WHALER MONTAUK, OUTRAGE, NEWPORT AND OTHERS

RPS SEAT CUSHION - BOSTON WHALER MONTAUK, OUTRAGE, NEWPORT AND OTHERS

SKU : SB-1-PB

Boston Whaler reversible pilot seat cushion. This cushion is made from UV resistant marine grade vinyl, 3" Ultra High density foam, 3/4 inch treated plywood and stainless hardware. This cushion fastens to your new or existing "Z" legs with 8 stainless steel screws. Care and Maintenance Instructions Note: This cushion... Read More

Regular price

"This item is out of stock due to raw material suppliers closing for Covid-19.  Below are tentative arrival dates of products: 

Wood: mid September

Rub Rails: restock mid August

Cushions: small restock mid September, please email sales@specialtymarine.com for more details

Bimini tops: early September

If an item is shown as sold out we will be getting them back in stock.  You can sign up for an email alert via the red tab on the left hand side of the page.

Boston Whaler reversible pilot seat cushion. This cushion is made from UV resistant marine grade vinyl, 3" Ultra High density foam, 3/4 inch treated plywood and stainless hardware. This cushion fastens to your new or existing "Z" legs with 8 stainless steel screws.

Care and Maintenance Instructions

Note: This cushion is NOT offered in BRIGHT WHITE which was found on some late 1990's models

Note: Holes are not pre-drilled

Note: There are two sizes for this seat. The regular is found on most hulls prior to the 1990's while the larger seat (click here) is found primarily on 1990-1999 classic 17' hulls.

Note: (For installation onto Z-legs) in addition to the wood screws provided, it is recommended to use 5200 Marine Adhesive to attach the cushion to the Z-legs. This is highly recommended for the 18" Z-legs which flex more than the 15" legs. To do this, cut a small patch of mesh off around each screw location and apply adhesive so the wood is adhered directly to the legs. 

Dimensions: 38" x 19" x 3"

Sale

Unavailable

Sold Out