Pair Of Boston Whaler Montauk & Outrage Console Rod Holders
Pair Of Boston Whaler Montauk & Outrage Console Rod Holders
Pair Of Boston Whaler Montauk & Outrage Console Rod Holders
Pair Of Boston Whaler Montauk & Outrage Console Rod Holders

Pair Of Boston Whaler Montauk & Outrage Console Rod Holders

SKU : CR-1

Boston Whaler teak & 1 5/8" wide PVC console rod holders. Will fit the classic Montauk & Outrage series boats and most center consoles. Upper block is larger and angled to assure fishing rods are vertical to clear the console railing.  TFinished with the minimum 5 coats of Captains ZSpar varnish.  Includes stainless... Read More

Regular price $199

Information on next inventory release can be found via the home page.

If the bow hatch for your interior is out of stock you may select "no bow hatch" to order the interior now then sign up for an alert for the bow hatch.

There are no pre-orders however, you can sign up for IN STOCK alerts via the green tab on the right side of this page by the vertical cursor bar.

Secure Checkout With

Boston Whaler teak & 1 5/8" wide PVC console rod holders. Will fit the classic Montauk & Outrage series boats and most center consoles. Upper block is larger and angled to assure fishing rods are vertical to clear the console railing.  TFinished with the minimum 5 coats of Captains ZSpar varnish.  Includes stainless hardware and fasteners.

Care and Maintenance Instructions

Note: When installing, the top bracket is the thicker of the two and the bevels that hold the plastic rod holders face up and are at an angle to account for the angle on the front of the console. The (12) 1/4-20 stainless oval phillips 2", (12) 1/4-20 LOCK NUT will be used to secure the PVC to the wood and the wood to the console. Insert the screws through the top and bottom of the PVC and through the back hole then insert your drill bit through the front hole to screw into place.

Installation Instructions

You may also like

Sale

Unavailable

Sold Out