BOSTON WHALER DAUNTLESS 18' STERN SEAT CUSHION SET 1998-2001 (BRIGHT W
BOSTON WHALER DAUNTLESS 18' STERN SEAT CUSHION SET 1998-2001 (BRIGHT WHITE)

BOSTON WHALER DAUNTLESS 18' STERN SEAT CUSHION SET 1998-2001 (BRIGHT WHITE)

SKU : BSD-18CS

Boston Whaler Dauntless 18' stern seat cushion set (3 cushions).  This set does not include the bars for attaching the backrests. These cushions are made from UV resistant marine grade bright white vinyl with grey piping, and include stainless snaps for installation. Care and Maintenance Instructions Note: large stern seat snaps... Read More

Regular price $589

You can sign up for IN STOCK alerts via the green tab on the right side of this page by the vertical cursor bar.

Boston Whaler Dauntless 18' stern seat cushion set (3 cushions).  This set does not include the bars for attaching the backrests. These cushions are made from UV resistant marine grade bright white vinyl with grey piping, and include stainless snaps for installation.

Care and Maintenance Instructions

Note: large stern seat snaps are not on a flap but instead directly on the cushion. Loose male snaps are provided in the instance your original cushion used the flap snap system.

1998-2001 Seat cushion dimensions: 77" x 19.5" x 2"

1998-2001 Backrest cushion dimensions: 32.5" x 8.5" 

Installation instructions for backrests: You will first want to mark the back of the cushion where the screws will be fastened. Then, make small incisions with a razor blade in an "x" shape. This is to ensure that there is no chance for the vinyl to get "caught" in the drill bit. Using a 1/8" drill bit, drill holes in the center of those "x" that you made with the razor blade. The plywood backing inside the cushion is 3/4" thick, so you will know once the drill bit reaches through the plywood. Don't drill any deeper. Once the holes are drilled, simply fasten the cushion to the brackets with the screws using a Phillips bit on a drill, or you can even fasten them by hand.

Sale

Unavailable

Sold Out