Boston Whaler Dauntless 220 Cushion Set (Bright White)
Boston Whaler Dauntless 220 Cushion Set (Bright White)
Boston Whaler Dauntless 220 Cushion Set (Bright White)
Boston Whaler Dauntless 220 Cushion Set (Bright White)
Boston Whaler Dauntless 220 Cushion Set (Bright White)
Boston Whaler Dauntless 220 Cushion Set (Bright White)

Boston Whaler Dauntless 220 Cushion Set (Bright White)

SKU : DCS-22-RPS-IGD-1

Boston Whaler 22' Dauntless full cushion set for 2000-2001 models with soft core reversible pilot seat OR dual cushion leaning post pilot seat AND stern seat consisting of a single seat cushion and dual stern backrests. This set includes the 4 segment bow cushion, 72qt cooler cushion, console backrest cushion,... Read More

Regular price

Information on next inventory release can be found via red lettering on home page

You can sign up for IN STOCK alerts via the green tab on the right side of this page by the vertical cursor bar.

Secure Checkout With

Boston Whaler 22' Dauntless full cushion set for 2000-2001 models with soft core reversible pilot seat OR dual cushion leaning post pilot seat AND stern seat consisting of a single seat cushion and dual stern backrests. This set includes the 4 segment bow cushion, 72qt cooler cushion, console backrest cushion, reversible pilot seat or leaning post cushions, stern seat cushion, and two stern seat backrests (does not include metal bars for backrests). These cushions are made from UV resistant marine grade bright white vinyl with grey piping. Includes stainless snaps for installation.

Care and Maintenance Instructions

Bow cushion: shown in last picture

Cooler cushion (72qt): 27 1/2" x 15" x 2"

Stern seat cushion dimension: 75" x 19 1/2" x 2"

Stern seat backrests dimensions (2) : 32 1/4" x 8 3/4"

Console backrest: 30" x 10" x 2"

 

Pilot Seat Options

Pilot seat cushion dimensions (foam core): 32 1/2" x 16 1/2" x 2"

Pilot backrest cushion dimensions: 37 1/2" x 5" x 9 1/2"

OR

Leaning post cushion dimensions: shown in second to last picture

Backrest cushion dimensions:  34 1/2" X 8 3/4"

 

Installation instructions for backrests without holes:  You will first want to mark the back of the cushion where the screws will be fastened. Then, make small incisions with a razor blade in an "x" shape. This is to ensure that there is no chance for the vinyl to get "caught" in the drill bit. Using a 1/8" drill bit, drill holes in the center of those "x" that you made with the razor blade. The plywood backing inside the cushion is 3/4" thick, so you will know once the drill bit reaches through the plywood. Don't drill any deeper. Once the holes are drilled, simply fasten the cushion to the brackets with the screws using a phillips bit on a drill, or you can even fasten them by hand.

You may also like

Sale

Unavailable

Sold Out