Wonderful Experience with specialty Marine! Very Very Very nice stern light.
Search Products
Boston Whaler Classic Stern Light, Anchor Light (LED) 316 Stainless
Boston Whaler Classic Stern Light, Anchor Light (LED) 316 Stainless
SKU:SL-1-WITHOUT
103 in stock
THESE LIGHTS WILL HAVE AN OPTION TO SHIP FOR A FLAT RATE OF $24 WITH USPS WHEN ORDERED ALONE. IF YOU ORDERED WITH ANY OTHER ITEMS IT WILL DEFAULT TO THE UPS...
Read More
Regular price
$194 USD
Regular price
Sale price
$194 USD
Shipping calculated at checkout.
Quantity
If out of stock, you can sign up for IN STOCK notice alerts via the green tab on the right side of this page by the vertical cursor bar.
Couldn't load pickup availability
Secure Checkout With
THESE LIGHTS WILL HAVE AN OPTION TO SHIP FOR A FLAT RATE OF $24 WITH USPS WHEN ORDERED ALONE. IF YOU ORDERED WITH ANY OTHER ITEMS IT WILL DEFAULT TO THE UPS RATE OF $55+. PLEASE REMEMBER, USPS DOES NOT GUARANTEE ARRIVAL DATES.
- This item is now standard with 1156 LED! Uses only a fraction of power vs conventional bulbs.
- Shines brighter and will last thousands of hours of continuous use
- It is quickly removable from its stanchions and can be stowed away when not needed.
- Includes 14 gauge quick disconnect terminals (not pictured), rubber stopper for light base water intrusion, bulb, and socket.
- 3/4" diameter, 55" height 316 stainless post (Coast Guard regulated height). Can be cut down with pipe cutter and dremel but lens must be above your outboard in its highest position.
Boston Whaler 316 Stainless steel LED stern light, anchor light. Will fit all Classic model boats from 9 - 17ft. Available with or without mounting stanchions. **Will also fit other boats and larger Outrage models if mounted properly (must be proper height above water). Made from high quality, mirror polished 316 stainless steel, Not inferior 304 which, is what some other vendors use. This item uses a BA15S/1156 light source.
Wiring: If wired individually to a switch, use a 3 amp fuse. If combining a bow light to the same switch/circuit, use a 7.5 amp fuse. (If running with dual bow lights, use a 20 amp fuse) LED only. Also, the white wire is hot and should be noted with red tape to indicate it was tested prior to sending.
Note: Thread tape should be used to reduce the risk of water intrusion due to rattling the lens loose and losing a solid seal between the lens and the gasket.
Reducing height of light: If you plan on cutting down your light to a more desirable height please follow these instructions. There is a rubber stopper tightly inserted in the bottom of the tube. Not only is the stopper in the pipe but the wires are also snug in the plug holes. It may be difficult to remove the stopper from the outside. If that is the case, carefully make your cut while the wires are still inside and the light is still assembled. There will be a bit of slack in the wires inside the tube so when you make the cut and go to separate the two new pieces of tubing you will have some room to do so. Once the pipe is cut, take any long hard poker and push the plug out from the inside of the short tube. Once pushed out, you may need a bit of soapy water or other lubricant to remove the wires and also to reinsert them into the new bottom of your pole.
Installation Instructions
11'-13' Continuous Wave Diagram
15'-17' Continuous Wave Diagram
Installation Video
Customer Reviews
Overall rating: 4.9 / 5 from 56 reviews.
Product is very high quality.
Quality. Good wrapping job.
I found the fixture pretty easy to install. I made it about six inches shorter with a tubing cutter.
My experience so far has not been very extensive yet. However, I was able to easily locate and order the product I needed. The product also arrived well packaged, and in great condition. I even experienced an unexpected level of honesty and transparency on the part of the company, in the event of a slight error in one of the fees applied to the price of the product. I can’t say anything yet about how the product works, or my level of satisfaction with that. I will need to access help to install it. I am optimistic about it though, and had an overall great experience acquiring this product from this company.
Ok
Pricey but beautiful
Appreciate the always great customer service and 100% satisfied with the product
Nice stuff
Excellent product
Great that these parts are available to properly restore a vintage Whaler
Wish I had the factory connector plate and cover.
Easy to order. Ordered 2 of the same part and they called to make sure I needed two. I didn’t and appreciate the lady who called and had informed me. Will recommend you for Boston whaler parts.
Great people, great products
great
Awesome
Excellent service. Quick shipping
Really nice looking light and very well made
I first thought this might be a little too high for a 17 Montauk but the law requires the light to be above the motor housing in our state
thank you
Great quality looks original worth the money
All the parts have ordered are on time and look great. The information you provide for assembly and installlation are very heipful.
Excellent quality product!
Arrived on time and as promised.
I, like that it’s available OEM parts for my Boston Whaler Montauk. 🚤🤓Aaron
GREAT QUALITY
Excellent service, and quality.
Quality parts, fast order to delivery time.
Fine well made hardware. No issues so far. Pretty much the exact same hardware as original 1971 hardware. Will know how well it’s made months from now.
Great service!
The new Stern Light is Great. It fit in my existing Stand-offs. I also love that it came with the connectors. It was very easy to connect to power, and very bright. No more worries about a bulb working, or not working, while on the water at night.
Always great experience when ordering parts from Specialty Marine
did i get a dealer discount
Just what I wanted
Everything I have purchased has been very high quality, packed very well and arrived promptly. In my opinion there is no better place to get whaler replacement parts!
The stern light mast and light are very well made from topnotch materials. It is a full cut above that which is available from popular marine suppliers. It is also accurately reproduced to look exactly like the OEM parts on my 1986 17' Super Sport. I already have installed a Specialty Marine new full wooden interior kit, which is spectacular. Finally, dealing with Specialty Marine online was a breeze, and the shipping was very fast. I highly recommend Specialty Marine to those wishing to keep their vintage Boston Whalers looking that way!
Waiting to get it installed but it looks great.
Everything looks great. I’m not installing but looking forward to the finished project
good stuff
Always great Thanks