BOSTON WHALER 16'/17' NAUSET,SAKONNET, EASTPORT OR MONTAUK CONSOLE DIY
BOSTON WHALER 16'/17' NAUSET,SAKONNET, EASTPORT OR MONTAUK CONSOLE DIY KIT
BOSTON WHALER 16'/17' NAUSET,SAKONNET, EASTPORT OR MONTAUK CONSOLE DIY KIT
BOSTON WHALER 16'/17' NAUSET,SAKONNET, EASTPORT OR MONTAUK CONSOLE DIY KIT
BOSTON WHALER 16'/17' NAUSET,SAKONNET, EASTPORT OR MONTAUK CONSOLE DIY KIT
BOSTON WHALER 16'/17' NAUSET,SAKONNET, EASTPORT OR MONTAUK CONSOLE DIY KIT

BOSTON WHALER 16'/17' NAUSET,SAKONNET, EASTPORT OR MONTAUK CONSOLE DIY KIT

SKU : CON-1B

Boston Whaler 16'/17' Nauset, Sakonnet or Eastport soid mahogany (not veneer) console KIT complete with windshield.   Available with or without the optional front seat. This is an unvarnished and partially unassembled kit that you finish yourself. This console was standard on many 16'/17' classic Boston Whalers from the 60's and... Read More

Regular price

"This item is out of stock. Below are tentative arrival dates of products: 

You can sign up for an email alert via the green tab on the right side of the page

Sport, Sourpuss, 40th anniversary interior kits: Late November 2020

All other mahogany kits: February 2021

Boat Covers and Cushions: late November 2020

Rail Kits: late November 2020 

Boston Whaler 16'/17' Nauset, Sakonnet or Eastport soid mahogany (not veneer) console KIT complete with windshield.   Available with or without the optional front seat. This is an unvarnished and partially unassembled kit that you finish yourself. This console was standard on many 16'/17' classic Boston Whalers from the 60's and 70's. This console can also be used in newer Montauk and Outrage hulls, or any boat that is configured for a center console setup.  

Cover sold separately here

Care and Maintenance Instructions

Note: Despite measures such as braces and against grain wood placement, due to the nature of raw wood there will be slight bowing in these pieces. Once assembled the bowing will diminish.

Note: Edges are not required to be sealed however the recommended approach is to use waterproof wood glue or West Systems epoxy on the edges which serves a dual purpose of bonding in addition to the screws making it considerably strong as well as sealing. Red LockTite should be used on finishing screws. 

Depth - front of console to back of console, furthest dimension (bow to stern) - 25" (the bottom panels are inset, which is the portion that fastens to the deck "footprint", which brings this down to 24") (2) 12 gallon Moeller gas tanks can be stowed inside the console.

Width - left to right, furthest dimension - 37" (the bottom panels are inset, which is the portion that fastens to the deck "footprint", which brings this down to 35 1/2") Height - total height from deck to the top of the windshield - 42 1/2".

Height from deck to the top surface of console (platform that windshield is fastened to) - 30 1/4")

Windshield- 32" x 13" x 13"

Installation Instructions

Front Seat Instructions

Windshield Instructions

Cleat Instructions

Console Placement

Sale

Unavailable

Sold Out