RPS Seat Cushion (Large Version) - Boston Whaler Montauk, Newport, Out
RPS Seat Cushion (Large Version) - Boston Whaler Montauk, Newport, Outrage
RPS Seat Cushion (Large Version) - Boston Whaler Montauk, Newport, Outrage
RPS Seat Cushion (Large Version) - Boston Whaler Montauk, Newport, Outrage
RPS Seat Cushion (Large Version) - Boston Whaler Montauk, Newport, Outrage
RPS Seat Cushion (Large Version) - Boston Whaler Montauk, Newport, Outrage
RPS Seat Cushion (Large Version) - Boston Whaler Montauk, Newport, Outrage
RPS Seat Cushion (Large Version) - Boston Whaler Montauk, Newport, Outrage
RPS Seat Cushion (Large Version) - Boston Whaler Montauk, Newport, Outrage

RPS Seat Cushion (Large Version) - Boston Whaler Montauk, Newport, Outrage

SKU : SB-1N-OW

Reversible pilot seat cushion (Large version: 38" x 23").  Click here for the original size. This cushion is made from UV resistant marine grade vinyl, 3" Ultra High density foam, 3/4 inch treated plywood and stainless hardware. This cushion fastens to your new or existing "Z" legs with 8 stainless steel screws... Read More

Regular price

Information on the estimated "in stock" date can be found on the home page.

You can sign up for IN STOCK notice alerts via the green tab on the right side of this page by the vertical cursor bar.

For wood interiors only: If the bow hatch for your interior is out of stock you may select "no bow hatch" which will allow you to purchase the interior kit while in stock. Then you can sign up for an alert for the bow hatch.

Secure Checkout With

Reversible pilot seat cushion (Large version: 38" x 23").  Click here for the original size. This cushion is made from UV resistant marine grade vinyl, 3" Ultra High density foam, 3/4 inch treated plywood and stainless hardware. This cushion fastens to your new or existing "Z" legs with 8 stainless steel screws and can be used in place of the regular 38"x19" cushion.

Care and Maintenance Instructions

Note: Holes are not pre-drilled

Note: There are two sizes for this seat. The regular (38" X 19") is found on most hulls prior to the 1990's while the larger (38" X 23") is found primarily on 1990-1999 classic 17' hulls.  If using the larger seat cushion you will also need the larger swing arms found here.

Note: (For installation onto Z-legs) in addition to the wood screws provided, it is recommended to use 5200 Marine Adhesive to attach the cushion to the Z-legs. This is highly recommended for the 18" Z-legs which flex more than the 15" legs. To do this, cut a small patch of mesh off around each screw location and apply adhesive so the wood is adhered directly to the legs. 

Dimensions: 38" x 23"

Installation Instructions

You may also like

Sale

Unavailable

Sold Out