Categories
Information

WRAP AROUND RAIL - CLASSIC 13' BOSTON WHALER (OEM STYLE) FOR 1979-1999 HULLS

Boston Whaler Classic
Boston Whaler Classic
Boston Whaler Classic
Boston Whaler Classic
Back to List
 
$460.90
SKU:
WA-13
Qty:
 
 
 
Additional Info
pdf Anchor-To-Foam-Instructions.pdf (203.6 KB)
png WA-13 SKU PARTS.png (372.1 KB)
pdf WA-13_Instructions.pdf (234.6 KB)
 

In Stock

 

OEM style wrap around rail for the classic Boston whaler 13'. Made from 7/8" polished 316 stainless tubing. The railing comes fitted with tube sleeves inside the rail at each joint to preserve structural integrity. These seams are at the "T" fitting locations and therefore concealed.  Includes 316 polished stainless stanchions, bases, and T fittings. Will fit classic 13' hulls  1979 - 1999. 

 

*Note: If your boat is was made before 1979 this rail will technically still fit, however, it requires modification and it will need to be moved forward approximately 6" so that the front uprights can mount to the top of the front lip in the bow.  This will cause a slight over hang slightly beyond the two uprights.  We do not have instructions for installing this rail kit on pre 1979 hulls.  The railing kits that are made for pre 1979 hulls are the bow rail and side rails.

 

*PROFESSIONAL INSTALLATION IS HIGHLY RECOMMENDED*

*RAILS WILL HAVE IDENTICAL PIECES ON EACH SIDE WHICH MEANS ONE SET OF SET SCREWS WILL FACE THE INSIDE OF THE BOAT WHILE THE OTHER SET WILL FACE THE GUNNEL*

 

Stanchions: (4) S-1

 

Front to Back: 9' 7.5"
From the widest points port to starboard:  60.5"
Upright heights listed from bow to stern
     1)8 3/4"
     2)14 3/8"
     3)11.5"

 
 
Google+