Categories
Information

PAIR OF BOSTON WHALER MONTAUK & OUTRAGE CONSOLE ROD HOLDERS

 
$175.00
SKU:
CR-1
Qty:
 
 
 
Additional Info
www.whalercentral.com/articles.php?cat_id=8&article_id=33
 

In Stock

 

Boston Whaler teak & PVC console rod holders.  Will fit the classic Montauk & Outrage series boats and most center consoles. Upper block is larger and angled to assure fishing rods are vertical to clear the console railing.Teak is varnished on both sides with 5 coats Z-spar Captains Varnish. Includes all stainless fasteners and is ready to install.

 

*Note: When installing, the top bracket is the thicker of the two and the bevels that hold the plastic rod holders face up and are at an angle to account for the angle on the front of the console.  The 12x2 screws will be used to secure the PVC to the wood and the wood to the console.  Insert the screws through the top and bottom of the PVC and through the back hole then insert your drill bit through the front hole to screw into place.

 
 
Google+