Categories
Information

BOSTON WHALER 16'/17' NAUSET,SAKONNET, EASTPORT OR MONTAUK CONSOLE DIY KIT

 
 
 
 
 
Back to List
 
$867.90
SKU:
CON-1B
Choose Your Options Below
 Front seat Cushions Price  Add to Select
 No  No  $867.90
 Yes  No  $998.80
 Yes  Yes  $1,195.70
 
Additional Info
pdf CON installation instructions.pdf (174.4 KB)
pdf CON-1 seat instructions.pdf (881.4 KB)
pdf CON-1A windshield instructions.pdf (89.0 KB)
pdf CON-1_instruct1.pdf (1.1 MB)
pdf CON-1_instruct2.pdf (393.8 KB)
jpg CON1-cleat.jpg (79.1 KB)
jpg console placement.jpg (259.9 KB)
 

In stock

 

Boston Whaler 16'/17' Nauset, Sakonnet or Eastport mahogany console KIT complete with windshield. Available with or without the optional front seat.  This is an unvarnished and partially unassembled kit that you finish yourself. This console was standard on many 16'/17' classic Boston Whalers from the 60's and 70's. This console can also be used in newer Montauk and Outrage hulls, or any boat that is configured for a center console setup. Made from a combination of solid mahogany and ribbon sapele (Identical to the original equipment) This console is unassembled and unvarnished.  *Don't forget a waterproof cover*

 

*PRODUCT NOTE:  Despite measures such as braces and against grain wood placement, due to the nature of raw wood there will be slight bowing in these pieces.  Once assembled the bowing will diminish.*

 

*BUILDING NOTE:  Edges are not required to be sealed however the recommended approach is to use waterproof wood glue or West Systems epoxy on the edges which serves a dual purpose of bonding in addition to the screws making it considerably strong as well as sealing.  Red LockTite should be used on finishing screws.

Maintenance Instructions

 

Depth - front of console to back of console, furthest dimension (bow to 
stern) - 25" (the bottom panels are inset, which is the portion that 
fastens to the deck "footprint", which brings this down to 24") 

(2) 12 gallon Moeller gas tanks can be stowed inside the console.

Width - left to right, furthest dimension - 37" (the bottom panels are 
inset, which is the portion that fastens to the deck "footprint", which 
brings this down to 35 1/2") 

Height - total height from deck to the top of the windshield - 42 1/2". 
Height from deck to the top surface of console (platform that windshield 
is fastened to) - 30 1/4") 

Windshield- appx 32"x13"x13"

 

*BUILDING NOTE:  Edges are not required to be sealed however the recommended approach is to use wood glue or epoxy on the edges which serves a dual purpose of bonding in addition to the screws making it considerably strong as well as sealing

 

 

 
 
Google+